9Wood

Home Your wood ceiling experts. Design to delivery.

8300 Acoustic Wood Wave

About andrewcox

8300 Acoustic Wood Wave

Get in the groove and apply to gentle curves with this adaptation of our aesthetically pleasing Acoustic Plank.

The 9Wood Acoustic Wave style wood ceiling offers a design with fine linear grooves for a vaulted or undulating ceiling. Typical planks are 192 mm (7 9/16″) wide, with 1/16″ wide grooves spaced apart 8mm (5/16″) or 16mm (5/8″) on center. Due to required fabrication tolerances, engineered veneered wood composites must be used. Member lengths are 4′ and 8′ (Nominal) long.

The Acoustic Wave provides a curved fine linear groove appearance while providing superior acoustic attenuation. A curved suspension system is first installed (curved T-Bar or radiused tubing). Then the planks are progressively installed to the radiused suspension system using clips. Access is through strategically located access panels or from room perimeters.

Download Documents

DATA SHEET

Download Now View Now

GUIDE SPEC

Download Now

CAD DETAILS

View All

ACOUSTIC TESTS

View All

SPECIFICATIONS
& PERFORMANCE

BELOW

SPECIES &
FINISHES

VIEW

REQUEST
SAMPLES

SUBMIT

FULL
LIBRARY

VISIT

Acclimatization

Acoustic Wood Waves must be cared for in a controlled interior environment (RH 25%-55% max; temp. 60°-80°) and installed only after reaching equilibrium moisture content. Should the building fall outside these limits, consult 9Wood for our Wood Ceiling Acclimatization for Professionals handbook.

Acoustics

The Acoustic Wood Wave enhances acoustics with Sound-Tex™ acoustic scrim, factory-attached to the back side. For added sound attenuation, extra fiberglass absorptive material can be placed within the T-Bar grid. Insulation is typically provided locally.

Fire Rating

Individual members and components can be treated with Class I (A) Fire Retardant chemicals (solid wood use FR coatings, veneered particleboard use FR formulas). Particular species or styles have not been tested.

LEED

Acoustic Wood Waves may qualify toward MR-3, MR-4.1/4.2, MR-5.1/5.2, MR-6, MR-7, IEQ-4.2 or IEQ-4.4. As all products are custom-fabricated, LEED credit opportunities are project by project. Please contact 9Wood for specifics.

MEP

The Acoustic Wood Wave permits MEP penetrations in the ceiling’s surface. Cut panels may require supplemental reinforcement. Fixtures and diffusers must be independently supported.

Seismic

Clips are typically mechanically screwed to T-Bar for seismic compliance. Please consult local code or a licensed engineer for any additional requirements.

Species & Finishes

9Wood offers both domestic and imported species for the Acoustic Wood Wave. Clear, matte sheen finish is standard; custom stain matches are available. For additional information see our species article.

Suspension

Acoustic Wood Waves are directly attached to curved 15/16″ T-Bar main runners or radiused 1″ x 1″ tubing. T-Bar or tubing is typically 2′ on center.

System Weight

Acoustic Wood Waves typically weigh 3 pounds per square foot or less.

Projects Featuring this System

Sacramento International Airport - Landside Terminal

Sacramento, CA

Sacramento International Airport - Landside Terminal

Sacramento, CA