9Wood

Home Your wood ceiling experts. Design to delivery.

1500 Baffle

About Michael Roemen

Michael Roemen previously served as 9Wood's Marketing Manager. Over 15 years with 9Wood, he worked in design assist, estimating, and rep support. His family teases him because he will drive out of the way to go see a building. Born and raised in Oregon, his favorite species is Douglas fir.

1500 Baffle

The 9Wood Baffle offers the visual definition of large, vertically-oriented members free of t-bar, backers, or other cross-members.

 

The 9Wood Baffle offers the visual definition of large, vertically-oriented members free of t-bar, backers, or other cross-members. Independently-suspended via aircraft-cable, Baffles are used for clouds or for cover in larger areas. Architectural veneers laminated to Class A substrate provide added dimensional stability over solid wood.

Baffles come in standard lengths of 8’ and 10’, with a standard width of 1-7/16”. We advise designers to consider grille products if they wish for a baffle design to have narrower members, such as 3/4″ width.

Attachment for the 9Wood Baffle is via adjustable 24” aircraft-cables threaded into baffle clips (Longer cable lengths available with added lead-time and cost). Biscuit clips at abutting ends provide a clean joint where longer runs are desired.

 

Download Documents

DATA SHEET

Download Now View Now

GUIDE SPEC

Download Now

CAD DETAILS

View All

ACOUSTIC TESTS

View All

SPECIFICATIONS
& PERFORMANCE

BELOW

SPECIES &
FINISHES

VIEW

REQUEST
SAMPLES

SUBMIT

FULL
LIBRARY

VISIT

Acclimatization

Baffles must be cared for in a controlled interior environment (RH 25%-55% max; temp. 60°-80°) and installed only after reaching equilibrium moisture content. Should the building fall outside these limits consult 9Wood for our 3 Tests/3 Tracks Acclimatization Advisory.

 

Acoustics

Baffles provide limited diffusion however, acoustics can be enhanced via sound absorbing material, such insulation, batts, or acoustical ceiling tile (ACT), specified for the desired areas.

 

Fire Rating

Individual members consist of veneered particleboard that is composed of a Fire Rated formula.

 

LEED

Baffles may qualify toward MR-3, MR-4.1/4.2, MR5.1/5.2, MR-6, MR-7, IEQ-4.2 or IEQ-4.4. As all products are custom-fabricated, LEED credit opportunities are project by project. Please contact 9Wood for specifics

 

MEP

Baffles permits MEP penetrations in the ceiling surface. Cut members may require supplemental reinforcement. Fixtures and diffusers must be independently supported.

 

Seismic

Please consult local code or a licensed engineer for any additional requirements.

 

Species & Finishes

9Wood can offer both domestic and imported veneer species for Baffles. Clear, matte sheen finish is standard; custom color matches and opaque finishes are available.

 

Suspension

Baffles are attached to the structural element via aircraft cable with factory-attached hex plugs and baffle clips. Cables come in standard 24” lengths. Longer lengths available with added lead-time and cost.

 

System Weight

Baffles typically weigh 2-6 pounds per linear foot, depending on thickness and depth of the baffle member

 

Projects Featuring this System

Viking Group

Caledonia, MI

Viking Group

Caledonia, MI

Compass Connection Cafe

Charlotte, NC

Compass Connection Cafe

Charlotte, NC

White & Case

Washington, D.C.

White & Case

Washington, D.C.